(VFSM26) 3.5mL Fluorescence Cuvette with Screw Cap, 5 Clear Walls, Molded, Lightpath 10mm
20%New
$458.00 $368.00
This fluorescence cuvette is for anaerobic work. A cap with a center hole (request) is available for sterile injections. Free extra septas if needed. Use -60°C – 1200°C. The price is for 1 piece.
In Stock
Add to Wishlist
Add to Wishlist
- Type: Molded
Description
Sealable Standard Fluorescence Cuvette Specifications
1 | 2 | 3 | 4 | |||
---|---|---|---|---|---|---|
Type | Screw Cap Sealable Cells | Optical Path Length | 10 mm | |||
Article No. | VFSM26 | Volume | 3500 µl | |||
Measuring Method | Fluorescence Cells | Transmission Matched | Optional Possible | |||
Number of Windows | 5 (Including Bottom) | Wavelength Range | UV/VIS (190 - 2500 nm) | |||
Outside Dimensions | Inside Dimensions | |||||
Height | 60 mm (with cap) | Width | 10 mm | |||
Width | 12.5 mm | Depth | 10 mm | |||
Depth | 12.5 mm | Center Height | 8.5 - 20 mm | |||
Fabrication Method | Molded* | Package | Cell, Cap & Septa | |||
Notes | 1. This cuvette is for anaerobic work; 2. Optional cap with center hole (request) is available for sterile injections; 3. Temperature-Resistant (Low down to -60°C/-76°F and High up to 1200°C/2192°F); 4. Acid, base, organic solvent-resistant; no leakage is found for these cuvettes containing hydrochloric acid, anhydrous ethanol, carbon tetrachloride, and benzene for 24 hours; 5. Packed with foam and bubble wraps for safe transportation and passed 1-meter drop test before shipment. |
Comparison of Fabrication Types
1 | 2 | 3 | 4 | ||
---|---|---|---|---|---|
*Molded | *Fused | *Bonded / Glued | |||
UV vis ( 190- 2500 nm) | Yes | Yes | Yes | ||
Transmission Matched | On Request | No | No | ||
Transmission > 80% | Yes | Yes | Yes | ||
Resistant to Acids and Bases (except hydrofluoric acid) | Yes | Yes | No | ||
Resistant to Organic Solvents | Yes | Yes | No | ||
Usable upto 600°C (1112°F) | Yes | Yes | Yes | ||
Usable upto 1200°C (2192°F) | Yes | No | No | ||
0 Variations Reading | On Request | No | No | ||
Fabrication | Molded | Assembled with Quartz Powder | Assembled with Glue | ||
Adhesives | No | No | Yes | ||
Storage | Short Term Storage | Clean After Use | Clean After Use | ||
Available Material | Fused Quartz Material | ||||
Note | Molded and fused cuvettes and cells are assembled by direct fusion without the use of adhesives throughout the production process. This guarantees resistance against corrosive chemicals and high temperature. Each quartz cuvette and cell has excellent transmission from 190nm to 2500nm. |
You must be logged in to post a review.
Reviews
There are no reviews yet.