Flow Cells M6 Connector
M6 tubing/connector for flow cells
The M-6 threaded connector makes it simple and secure to connect the flow cell to your system’s pump/manifold piping. When threaded into the top of the flow cell, the threading is standard metric M6 type, which produces a tight seal. The M6 connection secures a PTFE tube in place, which seals tightly against the flow cell’s internal quartz surface. Your sample will only come into touch with PTFE and quartz with this design.
A stainless steel ring and neoprene o-ring arrangement protect the PTFE tubing from deforming when tightened, further stabilizing the connection. The provided tube has the following dimensions: 1.6mm OD, 0.8mm ID.
|M6 Connector||Total height, tall side||26 mm|
|M6 Connector||Total height, short side||19 mm|
|M6 Connector||Diameter||6 mm|
|PTFE tubing||Outside diameter (OD)||1.6 mm|
|PTFE tubing||Inside diameter (ID)||0.8 mm|
|PTFE tubing||total length||100-200 mm|