(VFSM41) 3.5mL Standard Fluorescence Cuvette com tampa de parafuso, moldado, fundo redondo, lightpath 10mm
14%
$211.00 $182.00
Este cuvette fluorescência é para trabalho anaeróbico, com um fundo redondo que é mais barato que fundo plano. Uma tampa com um orifício central (pedido) está disponível para injeções estéreis. Septas extra grátis, se necessário. Utilizar -60°C – 1200°C. O preço é para 1 peça.
In Stock
Add to Wishlist
Add to Wishlist
Descrição
Especificações de Cuvette de Fluorescência Padrão Selável
| 1 | 2 | 3 | 4 | |||
|---|---|---|---|---|---|---|
| Type | Screw Cap Sealable Cells | Optical Path Length | 10 mm | |||
| Article No. | VFSM41 | Volume | 3500 µl | |||
| Measuring Method | Fluorescence Cells | Transmission Matched | Optional Possible | |||
| Number of Windows | 4 | Wavelength Range | UV/VIS (190 - 2500 nm) | |||
| Outside Dimensions | Inside Dimensions | |||||
| Height | 60 mm | Width | 10 mm | |||
| Width | 12.5 mm | Depth | 10 mm | |||
| Depth | 12.5 mm | Center Height | 8.5 - 20 mm | |||
| Fabrication Method | Molded* | Package | Cell, Cap & Septa | |||
| Notes | 1. This cuvette is for anaerobic work; 2. Optional cap with center hole (request) is available for sterile injections; 3. Temperature-Resistant (Low down to -60°C/-76°F and High up to 1200°C/2192°F); 4. Acid, base, organic solvent-resistant; no leakage is found for these cuvettes containing hydrochloric acid, anhydrous ethanol, carbon tetrachloride, and benzene for 24 hours; 5. Packed with foam and bubble wraps for safe transportation and passed 1-meter drop test before shipment. | |||||
Comparação de Tipos de Fabricação
| 1 | 2 | 3 | 4 | ||
|---|---|---|---|---|---|
| *Molded | *Fused | *Bonded / Glued | |||
| UV vis ( 190- 2500 nm) | Yes | Yes | Yes | ||
| Transmission Matched | On Request | No | No | ||
| Transmission > 80% | Yes | Yes | Yes | ||
| Resistant to Acids and Bases (except hydrofluoric acid) | Yes | Yes | No | ||
| Resistant to Organic Solvents | Yes | Yes | No | ||
| Usable upto 600°C (1112°F) | Yes | Yes | Yes | ||
| Usable upto 1200°C (2192°F) | Yes | No | No | ||
| 0 Variations Reading | On Request | No | No | ||
| Fabrication | Molded | Assembled with Quartz Powder | Assembled with Glue | ||
| Adhesives | No | No | Yes | ||
| Storage | Short Term Storage | Clean After Use | Clean After Use | ||
| Available Material | Fused Quartz Material | ||||
| Note | Molded and fused cuvettes and cells are assembled by direct fusion without the use of adhesives throughout the production process. This guarantees resistance against corrosive chemicals and high temperature. Each quartz cuvette and cell has excellent transmission from 190nm to 2500nm. | ||||
Tem de iniciar sessão para enviar uma avaliação.
Avaliações
Ainda não existem avaliações.