(VFSM3J) Cuvetta a fluorescenza standard da 3,5 ml con tappo a vite, stampata, nuova, percorso ottico 10 mm
15%
$257.00 $219.00
Questa cuvetta a fluorescenza è per lavori anaerobici. Per le iniezioni sterili è disponibile un cappuccio con foro centrale (a richiesta). Setti extra gratuiti se necessario. Utilizzare -60°C – 1200°C. Il prezzo è per 1 pezzo .
In Stock
Add to Wishlist
Add to Wishlist
Descrizione
Specifiche della cuvetta di fluorescenza standard sigillabile
| 1 | 2 | 3 | 4 | |||
|---|---|---|---|---|---|---|
| Type | Screw Cap Sealable Cells | Optical Path Length | 10 mm | |||
| Article No. | VFSM3J | Volume | 3500 µl | |||
| Measuring Method | Fluorescence Cells | Transmission Matched | Optional Possible | |||
| Number of Windows | 4 | Wavelength Range | UV/VIS (190 - 2500 nm) | |||
| Outside Dimensions | Inside Dimensions | |||||
| Height | 58 mm | Width | 10 mm | |||
| Width | 12.5 mm | Depth | 10 mm | |||
| Depth | 12.5 mm | Center Height | 8.5 - 20 mm | |||
| Fabrication Method | Molded* | Package | Cell, Cap & Septa | |||
| Notes | 1. This cuvette is for anaerobic work; 2. Optional cap with center hole (request) is available for sterile injections; 3. Temperature-Resistant (Low down to -60°C/-76°F and High up to 1200°C/2192°F); 4. Acid, base, organic solvent-resistant; no leakage is found for these cuvettes containing hydrochloric acid, anhydrous ethanol, carbon tetrachloride, and benzene for 24 hours; 5. Packed with foam and bubble wraps for safe transportation and passed 1-meter drop test before shipment | |||||
Confronto dei tipi di fabbricazione
| 1 | 2 | 3 | 4 | ||
|---|---|---|---|---|---|
| *Molded | *Fused | *Bonded / Glued | |||
| UV vis ( 190- 2500 nm) | Yes | Yes | Yes | ||
| Transmission Matched | On Request | No | No | ||
| Transmission > 80% | Yes | Yes | Yes | ||
| Resistant to Acids and Bases (except hydrofluoric acid) | Yes | Yes | No | ||
| Resistant to Organic Solvents | Yes | Yes | No | ||
| Usable upto 600°C (1112°F) | Yes | Yes | Yes | ||
| Usable upto 1200°C (2192°F) | Yes | No | No | ||
| 0 Variations Reading | On Request | No | No | ||
| Fabrication | Molded | Assembled with Quartz Powder | Assembled with Glue | ||
| Adhesives | No | No | Yes | ||
| Storage | Short Term Storage | Clean After Use | Clean After Use | ||
| Available Material | Fused Quartz Material | ||||
| Note | Molded and fused cuvettes and cells are assembled by direct fusion without the use of adhesives throughout the production process. This guarantees resistance against corrosive chemicals and high temperature. Each quartz cuvette and cell has excellent transmission from 190nm to 2500nm. | ||||
Devi effettuare l’accesso per pubblicare una recensione.
Recensioni
Ancora non ci sono recensioni.